Description
The Chute feeder SRGM-III belongs to nonwoven fabric machines. It is used for medium to
coarse denier fibers to store the opened fiber and then facilitate the transfer of an even layer
or even quantity of fiber across the width of the machine to feed the card. Average roller and
stripping roller drive separately. Spiked lattice controlled by inverter. Photo electric sensors
continually control fiber levels in the unit.
This machine is used to mix the opened fiber fully and feed evenly to next working procedure.
The photo-electricity controls the storage of the fiber trunk, through adjusting the vibrating plate to
adjust feeding quantity.
Adopt the spiked lattice to transfer the fiber. The photo-electricity controls the output of the fiber
trunk.
The end face of the axis has protecting tray to prevent the fiber rolling on beaters.
The diameter of beater is φ310mm; adopt 3 nail-stick screws to fix.
High quality carbon steel plates of 8mm thick are welded into main frame with qualitative treatment.
The vibrating motor is 0.75kw×6 poles ordinary motor.
The spiked lattice is driven by 1.75kw inverter motor matched with 80/10:1 worm wheel.
Reviews
There are no reviews yet.